dmesg - Intel Xeon E5-2667 v3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.11.2.el6.x86_64 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Tue Mar 25 19:59:55 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000078f66000 (usable)
BIOS-e820: 0000000078f66000 - 000000007985c000 (reserved)
BIOS-e820: 000000007985c000 - 0000000079d4c000 (ACPI NVS)
BIOS-e820: 0000000079d4c000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed45000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000004080000000 (usable)
DMI 3.0 present.
SMBIOS version 3.0 @ 0xF05B0
DMI: Supermicro SYS-6028TP-DNCFR/X10DRT-PIBF, BIOS 2.0 12/18/2015
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x4080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3F8000000000 uncachable
2 base 0000C5800000 mask 3FFFFF800000 write-through
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x78f66 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-0000000078f66000
0000000000 - 0040000000 page 1G
0040000000 - 0078e00000 page 2M
0078e00000 - 0078f66000 page 4k
kernel direct mapping tables up to 78f66000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000004080000000
0100000000 - 4080000000 page 1G
kernel direct mapping tables up to 4080000000 @ 12000-13000
RAMDISK: 3724e000 - 37fef353
ACPI: RSDP 00000000000f0580 00024 (v02 SUPERM)
ACPI: XSDT 00000000798ac0a8 000CC (v01 01072009 AMI 00010013)
ACPI: FACP 00000000798dccd0 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000798ac208 30AC4 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0000000079d4af80 00040
ACPI: APIC 00000000798dcde0 00144 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 00000000798dcf28 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 00000000798dcf70 0009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 00000000798dd010 00040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 00000000798dd050 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 00000000798dd090 00042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 00000000798dd0d8 00038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: MSCT 00000000798dd110 00090 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SLIT 00000000798dd1a0 00030 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SRAT 00000000798dd1d0 01158 (v03 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 00000000798de328 00040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 00000000798de368 1717F (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: SSDT 00000000798f54e8 0264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 00000000798f7b38 00064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 00000000798f7ba0 00102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 00000000798f7ca8 001A0 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 00000000798f7e48 0027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 00000000798f80c8 00030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 00000000798f80f8 00230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 00000000798f8328 00130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 0 -> APIC 8 -> Node 0
SRAT: PXM 0 -> APIC 10 -> Node 0
SRAT: PXM 0 -> APIC 12 -> Node 0
SRAT: PXM 0 -> APIC 14 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 1 -> APIC 24 -> Node 1
SRAT: PXM 1 -> APIC 26 -> Node 1
SRAT: PXM 1 -> APIC 28 -> Node 1
SRAT: PXM 1 -> APIC 30 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-2080000000
SRAT: Node 1 PXM 1 2080000000-4080000000
NUMA: Allocated memnodemap from 12040 - 12180
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000002080000000
NODE_DATA [0000000000012180 - 000000000004617f]
bootmap [0000000000100000 - 000000000050ffff] pages 410
(9 early reservations) ==> bootmem [0000000000 - 2080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002020aa4] TEXT DATA BSS ==> [0001000000 - 0002020aa4]
#3 [003724e000 - 0037fef353] RAMDISK ==> [003724e000 - 0037fef353]
#4 [0000084000 - 0000100000] BIOS reserved ==> [0000084000 - 0000100000]
#5 [0002021000 - 0002021418] BRK ==> [0002021000 - 0002021418]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000012030] ACPI SLIT ==> [0000012000 - 0000012030]
#8 [0000012040 - 0000012180] MEMNODEMAP ==> [0000012040 - 0000012180]
Bootmem setup node 1 0000002080000000-0000004080000000
NODE_DATA [0000002080000040 - 000000208003403f]
bootmap [0000002080035000 - 0000002080434fff] pages 400
(9 early reservations) ==> bootmem [2080000000 - 4080000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0002020aa4] TEXT DATA BSS
#3 [003724e000 - 0037fef353] RAMDISK
#4 [0000084000 - 0000100000] BIOS reserved
#5 [0002021000 - 0002021418] BRK
#6 [0000010000 - 0000012000] PGTABLE
#7 [0000012000 - 0000012030] ACPI SLIT
#8 [0000012040 - 0000012180] MEMNODEMAP
found SMP MP-table at [ffff8800000fdc50] fdc50
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff880028600000-ffff8800371fffff] on node 0
[ffffea0010800000-ffffea003fffffff] PMD -> [ffff880038000000-ffff8800677fffff] on node 0
[ffffea0040000000-ffffea00513fffff] PMD -> [ffff880067a00000-ffff880078dfffff] on node 0
[ffffea0051400000-ffffea0071bfffff] PMD -> [ffff880100000000-ffff8801207fffff] on node 0
[ffffea0071c00000-ffffea007fffffff] PMD -> [ffff882080600000-ffff88208e9fffff] on node 1
[ffffea0080000000-ffffea00bfffffff] PMD -> [ffff88208ec00000-ffff8820cebfffff] on node 1
[ffffea00c0000000-ffffea00e1bfffff] PMD -> [ffff8820cee00000-ffff8820f09fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x04080000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x00078f66
0: 0x00100000 -> 0x02080000
1: 0x02080000 -> 0x04080000
On node 0 totalpages: 33525488
DMA zone: 56 pages used for memmap
DMA zone: 129 pages reserved
DMA zone: 3793 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 477086 pages, LIFO batch:31
Normal zone: 451584 pages used for memmap
Normal zone: 32578560 pages, LIFO batch:31
On node 1 totalpages: 33554432
Normal zone: 458752 pages used for memmap
Normal zone: 33095680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000078f66000 - 000000007985c000
PM: Registered nosave memory: 000000007985c000 - 0000000079d4c000
PM: Registered nosave memory: 0000000079d4c000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [1] 08 09 10 11 12 13 14 15
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 66155119
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 264550052k/270532608k available (5326k kernel code, 2212928k absent, 3769628k reserved, 7012k data, 1280k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1352
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 1073741824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3200.188 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.37 BogoMIPS (lpj=3200188)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21777 entries in 86 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: DRHD base: 0x000000c7ffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr c7ffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007ba77000 end: 0x0000007ba86fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000c7ffc000 proximity domain: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x1
IOAPIC id 3 under DRHD base 0xfbffc000
IOAPIC id 1 under DRHD base 0xc7ffc000
IOAPIC id 2 under DRHD base 0xc7ffc000
HPET id 0 under DRHD base 0xc7ffc000
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz stepping 02
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Brought up 16 CPUs
Total of 16 processors activated (102395.68 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7985c000 (5177344 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
ACPI: PCI Interrupt Routing Table [\_SB_.UNC1._PRT]
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
ACPI: PCI Interrupt Routing Table [\_SB_.UNC0._PRT]
pci0000:7f: Requesting ACPI _OSC control (0x1d)
pci0000:7f: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x1000-0x7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xfedb0000-0xfedb000f]
pci_root PNP0A08:00: host bridge window [mem 0xfedc0000-0xfedc000f]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xc7ffbfff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xc762c000-0xc762ffff 64bit]
pci 0000:00:04.1: reg 10: [mem 0xc7628000-0xc762bfff 64bit]
pci 0000:00:04.2: reg 10: [mem 0xc7624000-0xc7627fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0xc7620000-0xc7623fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0xc761c000-0xc761ffff 64bit]
pci 0000:00:04.5: reg 10: [mem 0xc7618000-0xc761bfff 64bit]
pci 0000:00:04.6: reg 10: [mem 0xc7614000-0xc7617fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0xc7610000-0xc7613fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xc7639000-0xc7639fff]
pci 0000:00:11.4: reg 10: [io 0x7110-0x7117]
pci 0000:00:11.4: reg 14: [io 0x7100-0x7103]
pci 0000:00:11.4: reg 18: [io 0x70f0-0x70f7]
pci 0000:00:11.4: reg 1c: [io 0x70e0-0x70e3]
pci 0000:00:11.4: reg 20: [io 0x7020-0x703f]
pci 0000:00:11.4: reg 24: [mem 0xc7638000-0xc76387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:11.4: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xc7600000-0xc760ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xc7637000-0xc763700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xc7636000-0xc763600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xc7634000-0xc76343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xc7633000-0xc76333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x7070-0x7077]
pci 0000:00:1f.2: reg 14: [io 0x7060-0x7063]
pci 0000:00:1f.2: reg 18: [io 0x7050-0x7057]
pci 0000:00:1f.2: reg 1c: [io 0x7040-0x7043]
pci 0000:00:1f.2: reg 20: [io 0x7000-0x701f]
pci 0000:00:1f.2: reg 24: [mem 0xc7632000-0xc76327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xc7631000-0xc76310ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
pci 0000:01:00.0: reg 10: [io 0x6000-0x60ff]
pci 0000:01:00.0: reg 14: [mem 0xc7440000-0xc744ffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xc7400000-0xc743ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xc7300000-0xc73fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xc7300000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xc7200000-0xc72fffff 64bit]
pci 0000:02:00.0: reg 18: [mem 0xc5800000-0xc5ffffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xc7100000-0xc71fffff pref]
pci 0000:02:00.0: reg 134: [mem 0x00000000-0x007fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xc7100000-0xc72fffff]
pci 0000:00:02.0: bridge window [mem 0xc5800000-0xc5ffffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xc7520000-0xc753ffff]
pci 0000:03:00.0: reg 18: [io 0x5020-0x503f]
pci 0000:03:00.0: reg 1c: [mem 0xc7544000-0xc7547fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 10: [mem 0xc7500000-0xc751ffff]
pci 0000:03:00.1: reg 18: [io 0x5000-0x501f]
pci 0000:03:00.1: reg 1c: [mem 0xc7540000-0xc7543fff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: PME# disabled
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xc7500000-0xc75fffff]
pci 0000:00:02.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:07:00.0: reg 14: [mem 0xc7000000-0xc701ffff]
pci 0000:07:00.0: reg 18: [io 0x4000-0x407f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:06:00.0: bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:06:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03.BR7D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR2C._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
pci_root PNP0A08:01: host bridge window [io 0x8000-0xffff]
pci_root PNP0A08:01: host bridge window [mem 0xc8000000-0xfbffbfff]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0x8000-0xffff]
pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff]
pci 0000:80:00.0: PME# supported from D0 D3hot D3cold
pci 0000:80:00.0: PME# disabled
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: PME# disabled
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: PME# disabled
pci 0000:80:03.1: PME# supported from D0 D3hot D3cold
pci 0000:80:03.1: PME# disabled
pci 0000:80:03.2: PME# supported from D0 D3hot D3cold
pci 0000:80:03.2: PME# disabled
pci 0000:80:03.3: PME# supported from D0 D3hot D3cold
pci 0000:80:03.3: PME# disabled
pci 0000:80:04.0: reg 10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: reg 10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: reg 10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: reg 10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: reg 10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: reg 10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: reg 10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.4: reg 10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.1: PCI bridge to [bus 85-85]
pci 0000:80:03.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.2: PCI bridge to [bus 86-86]
pci 0000:80:03.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:80:03.3: PCI bridge to [bus 87-87]
pci 0000:80:03.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:80:03.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:80:03.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:80: on NUMA node 1 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR3B._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.QR3D._PRT]
pci0000:80: Requesting ACPI _OSC control (0x1d)
pci0000:80: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 74, 75, 76, 77, 78, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 74 for MSI
hpet: hpet3 irq 75 for MSI
hpet: hpet4 irq 76 for MSI
hpet: hpet5 irq 77 for MSI
hpet: hpet6 irq 78 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0cf8-0x0cff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:03: [mem 0xfec00000-0xfecfffff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [io 0x0074-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [io 0x0400-0x047f]
pnp 00:09: [io 0x0092]
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0072-0x0073]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x0580-0x059f]
pnp 00:09: [io 0x0600-0x061f]
pnp 00:09: [io 0x0880-0x0883]
pnp 00:09: [io 0x0800-0x081f]
pnp 00:09: [mem 0xfed1c000-0xfed3ffff]
pnp 00:09: [mem 0xfed45000-0xfed8bfff]
pnp 00:09: [mem 0xff000000-0xffffffff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfed12000-0xfed1200f]
pnp 00:09: [mem 0xfed12010-0xfed1201f]
pnp 00:09: [mem 0xfed1b000-0xfed1bfff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: [io 0x0a00-0x0a0f]
pnp 00:0a: [io 0x0a10-0x0a1f]
pnp 00:0a: [io 0x0a20-0x0a2f]
pnp 00:0a: [io 0x0a30-0x0a3f]
pnp 00:0a: [io 0x0a40-0x0a4f]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x02f8-0x02ff]
pnp 00:0c: [irq 3]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io 0x0ca2]
pnp 00:0d: [io 0x0ca3]
pnp 00:0d: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:0e: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [io 0x0400-0x047f] has been reserved
system 00:09: [io 0x0580-0x059f] has been reserved
system 00:09: [io 0x0600-0x061f] has been reserved
system 00:09: [io 0x0880-0x0883] has been reserved
system 00:09: [io 0x0800-0x081f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:09: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:09: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:0a: [io 0x0a00-0x0a0f] has been reserved
system 00:0a: [io 0x0a10-0x0a1f] has been reserved
system 00:0a: [io 0x0a20-0x0a2f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0a: [io 0x0a40-0x0a4f] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:02.2: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xc7300000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:02:00.0: reg 134: [mem 0x00000000-0x007fffff 64bit pref]
pci 0000:02:00.0: reg 134: [mem 0x00000000-0x007fffff 64bit pref]
pci 0000:02:00.0: reg 134: [mem 0x00000000-0x007fffff 64bit pref]
pci 0000:02:00.0: BAR 9: can't assign mem pref (size 0x1f800000)
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem 0xc7100000-0xc72fffff]
pci 0000:00:02.0: bridge window [mem 0xc5800000-0xc5ffffff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:03:00.0: BAR 7: set to [mem 0x90000000-0x9001ffff 64bit pref] (PCI address [0x90000000-0x9001ffff]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:03:00.0: BAR 10: set to [mem 0x90020000-0x9003ffff 64bit pref] (PCI address [0x90020000-0x9003ffff]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:03:00.1: BAR 7: set to [mem 0x90040000-0x9005ffff 64bit pref] (PCI address [0x90040000-0x9005ffff]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:03:00.1: BAR 10: set to [mem 0x90060000-0x9007ffff 64bit pref] (PCI address [0x90060000-0x9007ffff]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: PCI bridge to [bus 03-03]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xc7500000-0xc75fffff]
pci 0000:00:02.2: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: PCI bridge to [bus 04-04]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: bridge window [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io 0x4000-0x4fff]
pci 0000:06:00.0: bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:00:1c.2: bridge window [mem pref disabled]
pci 0000:80:03.3: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
pci 0000:80:03.3: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
pci 0000:80:03.3: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:80:03.2: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
pci 0000:80:03.2: BAR 15: assigned [mem 0xc8600000-0xc87fffff 64bit pref]
pci 0000:80:03.2: BAR 13: assigned [io 0x9000-0x9fff]
pci 0000:80:03.1: BAR 14: assigned [mem 0xc8800000-0xc89fffff]
pci 0000:80:03.1: BAR 15: assigned [mem 0xc8a00000-0xc8bfffff 64bit pref]
pci 0000:80:03.1: BAR 13: assigned [io 0xa000-0xafff]
pci 0000:80:03.0: BAR 14: assigned [mem 0xc8c00000-0xc8dfffff]
pci 0000:80:03.0: BAR 15: assigned [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci 0000:80:03.0: BAR 13: assigned [io 0xb000-0xbfff]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: PCI bridge to [bus 81-81]
pci 0000:80:00.0: bridge window [io disabled]
pci 0000:80:00.0: bridge window [mem disabled]
pci 0000:80:00.0: bridge window [mem pref disabled]
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: PCI bridge to [bus 82-82]
pci 0000:80:01.0: bridge window [io disabled]
pci 0000:80:01.0: bridge window [mem disabled]
pci 0000:80:01.0: bridge window [mem pref disabled]
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: PCI bridge to [bus 83-83]
pci 0000:80:02.0: bridge window [io disabled]
pci 0000:80:02.0: bridge window [mem disabled]
pci 0000:80:02.0: bridge window [mem pref disabled]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: PCI bridge to [bus 84-84]
pci 0000:80:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:80:03.0: bridge window [mem 0xc8c00000-0xc8dfffff]
pci 0000:80:03.0: bridge window [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci 0000:80:03.1: PCI bridge to [bus 85-85]
pci 0000:80:03.1: PCI bridge to [bus 85-85]
pci 0000:80:03.1: bridge window [io 0xa000-0xafff]
pci 0000:80:03.1: bridge window [mem 0xc8800000-0xc89fffff]
pci 0000:80:03.1: bridge window [mem 0xc8a00000-0xc8bfffff 64bit pref]
pci 0000:80:03.2: PCI bridge to [bus 86-86]
pci 0000:80:03.2: PCI bridge to [bus 86-86]
pci 0000:80:03.2: bridge window [io 0x9000-0x9fff]
pci 0000:80:03.2: bridge window [mem 0xc8400000-0xc85fffff]
pci 0000:80:03.2: bridge window [mem 0xc8600000-0xc87fffff 64bit pref]
pci 0000:80:03.3: PCI bridge to [bus 87-87]
pci 0000:80:03.3: PCI bridge to [bus 87-87]
pci 0000:80:03.3: bridge window [io 0x8000-0x8fff]
pci 0000:80:03.3: bridge window [mem 0xc8000000-0xc81fffff]
pci 0000:80:03.3: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.2: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 40 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 48 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
pci 0000:80:00.0: setting latency timer to 64
alloc irq_desc for 50 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:01.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 56 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:02.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
pci 0000:80:02.0: setting latency timer to 64
alloc irq_desc for 64 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:80:03.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.0: setting latency timer to 64
pci 0000:80:03.1: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.1: setting latency timer to 64
pci 0000:80:03.2: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.2: setting latency timer to 64
pci 0000:80:03.3: PCI INT A -> GSI 64 (level, low) -> IRQ 64
pci 0000:80:03.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xc7ffbfff]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xc7300000-0xc74fffff]
pci_bus 0000:02: resource 1 [mem 0xc7100000-0xc72fffff]
pci_bus 0000:02: resource 2 [mem 0xc5800000-0xc5ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xc7500000-0xc75fffff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0x90100000-0x902fffff]
pci_bus 0000:05: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:80: resource 4 [io 0x8000-0xffff]
pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff]
pci_bus 0000:84: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:84: resource 1 [mem 0xc8c00000-0xc8dfffff]
pci_bus 0000:84: resource 2 [mem 0xc8e00000-0xc8ffffff 64bit pref]
pci_bus 0000:85: resource 0 [io 0xa000-0xafff]
pci_bus 0000:85: resource 1 [mem 0xc8800000-0xc89fffff]
pci_bus 0000:85: resource 2 [mem 0xc8a00000-0xc8bfffff 64bit pref]
pci_bus 0000:86: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:86: resource 1 [mem 0xc8400000-0xc85fffff]
pci_bus 0000:86: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref]
pci_bus 0000:87: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:87: resource 1 [mem 0xc8000000-0xc81fffff]
pci_bus 0000:87: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:14.0: PCI INT D disabled
pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.0: PCI INT C disabled
pci 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.0: PCI INT C disabled
pci 0000:07:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13956k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1490083834.639:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 3BC36F007EF7D4EA
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 79 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 80 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.2: irq 81 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 82 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 83 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.2: irq 84 for MSI/MSI-X
pcieport 0000:80:00.0: setting latency timer to 64
alloc irq_desc for 85 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:00.0: irq 85 for MSI/MSI-X
pcieport 0000:80:01.0: setting latency timer to 64
alloc irq_desc for 86 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:01.0: irq 86 for MSI/MSI-X
pcieport 0000:80:02.0: setting latency timer to 64
alloc irq_desc for 87 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:02.0: irq 87 for MSI/MSI-X
pcieport 0000:80:03.0: setting latency timer to 64
alloc irq_desc for 88 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.0: irq 88 for MSI/MSI-X
pcieport 0000:80:03.1: setting latency timer to 64
alloc irq_desc for 89 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.1: irq 89 for MSI/MSI-X
pcieport 0000:80:03.2: setting latency timer to 64
alloc irq_desc for 90 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.2: irq 90 for MSI/MSI-X
pcieport 0000:80:03.3: setting latency timer to 64
alloc irq_desc for 91 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:80:03.3: irq 91 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Refined TSC clocksource calibration: 3199.997 MHz.
Switching to clocksource tsc
pciehp 0000:80:03.0:pcie04: HPC vendor_id 8086 device_id 2f08 ss_vid 0 ss_did 0
pciehp 0000:80:03.0:pcie04: service driver pciehp loaded
pciehp 0000:80:03.1:pcie04: HPC vendor_id 8086 device_id 2f09 ss_vid 0 ss_did 0
pciehp 0000:80:03.1:pcie04: service driver pciehp loaded
pciehp 0000:80:03.2:pcie04: HPC vendor_id 8086 device_id 2f0a ss_vid 0 ss_did 0
pciehp 0000:80:03.2:pcie04: service driver pciehp loaded
pciehp 0000:80:03.3:pcie04: HPC vendor_id 8086 device_id 2f0b ss_vid 0 ss_did 0
pciehp 0000:80:03.3:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0d: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0d: Found new BMC (man_id: 0x002a7c, prod_id: 0x0824, dev_id: 0x20)
ipmi_si 00:0d: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 18, io mem 0xc7634000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 18, io mem 0xc7633000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2017-03-21 08:10:48 UTC (1490083848)
Initalizing network drop monitor service
Freeing unused kernel memory: 1280k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1: new high speed USB device number 2 using ehci_hcd
ACPI: WMI: Mapper loaded
mpt3sas version 02.100.00.00-rh2 loaded
scsi0 : Fusion MPT SAS Host
mpt3sas 0000:01:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt3sas 0000:01:00.0: setting latency timer to 64
mpt3sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (264567676 kB)
mpt3sas0: MSI-X vectors supported: 8, no of cores: 16, max_msix_vectors: 8
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 97 for MSI/MSI-X
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mpt3sas 0000:01:00.0: irq 99 for MSI/MSI-X
mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 92
mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 93
mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 94
mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 95
mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 96
mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 97
mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 98
mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 99
mpt3sas0: iomem(0x00000000c7440000), mapped(0xffffc90028f60000), size(65536)
mpt3sas0: ioport(0x0000000000006000), size(256)
mpt3sas0: sending diag reset !!
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
mpt3sas0: diag reset: SUCCESS
mpt3sas0: Allocated physical memory: size(8117 kB)
mpt3sas0: Current Controller Queue Depth(2811),Max Controller Queue Depth(3072)
mpt3sas0: Scatter Gather Elements per IO(128)
mpt3sas0: LSISAS3008: FWVersion(09.00.00.00), ChipRevision(0x02), BiosVersion(08.21.00.00)
mpt3sas0: Protocol=(
Initiator
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
mpt3sas0: sending port enable !!
mpt3sas0: host_add: handle(0x0001), sas_addr(0x500304801961bf01), phys(8)
mpt3sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x50014ee2621fbf3b)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x500304801961bf01), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:11.4: irq 100 for MSI/MSI-X
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:11.4: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638100 irq 100
ata2: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638180 irq 100
ata3: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638200 irq 100
ata4: SATA max UDMA/133 abar m2048@0xc7638000 port 0xc7638280 irq 100
ahci 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 101 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
ata5: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632100 irq 101
ata6: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632180 irq 101
ata7: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632200 irq 101
ata8: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632280 irq 101
ata9: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632300 irq 101
ata10: SATA max UDMA/133 abar m2048@0xc7632000 port 0xc7632380 irq 101
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
xhci_hcd 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.11.2.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 9b 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-14: new high speed USB device number 2 using xhci_hcd
usb 3-14: New USB device found, idVendor=0557, idProduct=7000
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-14: configuration #1 chosen from 1 choice
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 4 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda1
usb 3-14.1: new low speed USB device number 3 using xhci_hcd
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-14.1: configuration #1 chosen from 1 choice
usb 3-14.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-14.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/input/input3
generic-usb 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/input/input4
generic-usb 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1490083858.913:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
mlx4_core: Mellanox ConnectX core driver v1.1 (Dec, 2011)
mlx4_core: Initializing 0000:02:00.0
mlx4_core 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
mlx4_core 0000:02:00.0: setting latency timer to 64
mlx4_core 0000:02:00.0: 64B EQEs/CQEs supported by the device but not enabled
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 102 for MSI/MSI-X
alloc irq_desc for 103 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 104 for MSI/MSI-X
alloc irq_desc for 105 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 105 for MSI/MSI-X
alloc irq_desc for 106 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 106 for MSI/MSI-X
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
mlx4_core 0000:02:00.0: irq 114 for MSI/MSI-X
mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.0 (Dec 2011)
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v1.0 (April 4, 2008)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
igb 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 115 for MSI/MSI-X
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 118 for MSI/MSI-X
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 119 for MSI/MSI-X
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 120 for MSI/MSI-X
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 121 for MSI/MSI-X
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 122 for MSI/MSI-X
alloc irq_desc for 123 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.0: irq 123 for MSI/MSI-X
igb 0000:03:00.0: irq 115 for MSI/MSI-X
igb 0000:03:00.0: irq 116 for MSI/MSI-X
igb 0000:03:00.0: irq 117 for MSI/MSI-X
igb 0000:03:00.0: irq 118 for MSI/MSI-X
igb 0000:03:00.0: irq 119 for MSI/MSI-X
igb 0000:03:00.0: irq 120 for MSI/MSI-X
igb 0000:03:00.0: irq 121 for MSI/MSI-X
igb 0000:03:00.0: irq 122 for MSI/MSI-X
igb 0000:03:00.0: irq 123 for MSI/MSI-X
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:4e:c0:86
igb 0000:03:00.0: eth0: PBA No: 070B00-000
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 37 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
igb 0000:03:00.1: setting latency timer to 64
alloc irq_desc for 124 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 124 for MSI/MSI-X
alloc irq_desc for 125 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 125 for MSI/MSI-X
alloc irq_desc for 126 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 126 for MSI/MSI-X
alloc irq_desc for 127 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 127 for MSI/MSI-X
alloc irq_desc for 128 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 128 for MSI/MSI-X
alloc irq_desc for 129 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 129 for MSI/MSI-X
alloc irq_desc for 130 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 130 for MSI/MSI-X
alloc irq_desc for 131 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 131 for MSI/MSI-X
alloc irq_desc for 132 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:03:00.1: irq 132 for MSI/MSI-X
igb 0000:03:00.1: irq 124 for MSI/MSI-X
igb 0000:03:00.1: irq 125 for MSI/MSI-X
igb 0000:03:00.1: irq 126 for MSI/MSI-X
igb 0000:03:00.1: irq 127 for MSI/MSI-X
igb 0000:03:00.1: irq 128 for MSI/MSI-X
igb 0000:03:00.1: irq 129 for MSI/MSI-X
igb 0000:03:00.1: irq 130 for MSI/MSI-X
igb 0000:03:00.1: irq 131 for MSI/MSI-X
igb 0000:03:00.1: irq 132 for MSI/MSI-X
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:4e:c0:87
igb 0000:03:00.1: eth1: PBA No: 070B00-000
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: resource (null) [io 0x0428-0x042f] conflicts with ACPI region GPE0 [io 0x428-0x42f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io 0x0500-0x053f] conflicts with ACPI region GPIV [io 0x52c-0x52d]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
power_meter ACPI000D:00: Found ACPI power meter.
ipmi device interface
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x36
platform microcode: firmware: requesting intel-ucode/06-3f-02
Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
Adding 131071992k swap on /dev/sda2. Priority:-1 extents:1 across:131071992k
IPv6: Loaded, but administratively disabled, reboot required to enable
ip_tables: (C) 2000-2006 Netfilter Core Team
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ib0: multicast join failed for ff12:401b:ffff:0000:0000:0000:ffff:ffff, status -22
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
8021q: adding VLAN 0 to HW filter on device eth1
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching